Paradise Hammocks - Choice of 12 Colours
Paradise Hammocks
Paradise Hammocks Unit 4, Castleport Ind., Alders Way, Paignton, Devon. TQ4 7QL. UK. sales@paradisehammocks.co.uk - 01803 666808

Hammock Masonry Fixing Kit
Add to Cart:



£10.95

Bookmark using any bookmarking manager!



The easiest way to support your Paradise hammock from brickwork, concrete or stone walls is to fix in a 12mm or 14mm expansion bolt (not suitable for cement block type walls unless reinforced).

The most commonly available expansion bolt is the Rawlhook M8. The M10 version is also suitable. To fix the bolt you will need a hammer action power drill, a 12mm and a 4-6mm masonry drill bit. If you are drilling into brickwork you should first locate the centre of the brick, as this is the strongest part.

Once you have marked where your fixing point is going to be drill a small pilot hole with the 4-6mm drill bit and then enlarge it with the 12mm bit to accommodate the Rawlhook. Ensure that the Rawlhook has not already been expanded, tap it into the hole and turn it until it is tight.

Attach the nautical rope to the hammock hooks and fixing points and set desired height.

Once attached, ease your weight onto the hammock and recheck the bolt ? it will probably need to be retightened. Repeat this operation a few times until the bolt is firmly secure.

Paradise Hammocks Setup Tips

Paradise Hammocs Setup Info


Product 2/2

Previous
Return to the Product List
Next

Copyright © 2010 Paradise Hammocks. Designed by Totnes Computers